
SSM03單組份手刮聚脲防水防護涂層
SSM03 Single component hand scraped polyurea waterproof protective coating
一、產品介紹Product introduction
SSM03單組份手刮聚脲防水防護涂層是德國Drache Handels UG 公司于二十一
世紀研發的一種單組份手刮厚涂型聚脲防水防護涂層材料,該產品施工后依靠空氣中的潮氣固化,由于其獨特的化學結構,具有卓越的施工性能、防水性能和防護性能。
SSM03 Single component hand scraped polyurea waterproof protective coating is made by Drache Handels UG from Germany in 21 Century research and development of a single-component hand-scraped thick coating polyurea waterproof protective coating material, the product depends on the moisture curing in the air after construction, due to its unique chemical structure, with excellent construction performance, waterproof performance and protection performance.
二、產品特性Product characteristics
? 高固體含量,低VOC排放;
? 施工方法簡便,可刮板刮涂,無需采用專業聚脲噴涂設備,一次性成膜厚,立面可達到1 mm不流掛;
? 良好的耐磨、抗撞擊、耐刻劃等物理性能;
? 優異的防水性能;
? 優異的耐化學介質腐蝕性能,可耐一定濃度的酸、堿、鹽、油、有機溶劑等;
? 優異的附著力,可快速牢固的粘結在鋼鐵、混凝土、木、玻璃纖維等基材的表面;
? 使用溫度范圍寬,可在-50℃~80℃的環境下使用;
? 單組份的特性使操作便捷,無需配比,降低了勞動力成本.
? High solid content, low VOC emission;
? The construction method is simple, can be scraper scraper coating,without to use professional polyurea spraying equipment, one-time film thickness, the facade can reach 1 mm no flow;
? Good wear resistance, impact resistance, scratch resistance and other physical properties;
? Excellent waterproof performance;
? Excellent corrosion resistance to chemical media, can withstand a certain concentration of acid, alkali, salt, oil, organic solvents, etc.
? Excellent adhesion, can be quickly and firmly bonded on the surface of steel, concrete, wood, glass fiber and other substrates;
? Wide temperature range, can be used in -50℃~80℃ environment;
? Single component characteristics make the operation convenient, no need to match, reduce labor costs.
三、產品應用范圍Product application range
建筑、水利、交通、化工、電力等領域,如屋面、衛生間的防水,水利大壩的防水,收縮縫的防水,海岸堤壩、港口碼頭裂縫修補維護等。
Building, water conservancy, transportation, chemical industry, electric power and other fields, such as roof, toilet waterproofing, water conservancy dam waterproofing, shrinkage joint waterproofing, coastal DAMS, port pier crack repair and maintenance.
四、技術參數Technical parameter
1、產品信息Product information
項目 |
結果 |
外觀 |
顏色可調 |
比重(g/cm3 ) |
1.25 |
粘度(cps )@20℃ |
5000 |
固含量(%) |
≥80 |
表干時間(小時) |
1-3 |
活化期(小時) |
0.5h |
理論涂布率 |
0.59kg/m2(厚度500um) |
2、產品物理性能Product physical properties
項目 |
測試標準 |
結果 |
硬度(邵氏A) |
ASTM D-2240 |
85 |
伸長率(%) |
ASTM D-412 |
≥300 |
拉伸強度(Mpa) |
ASTM D-412 |
≥15 |
撕裂強度(kN/m) |
ASTM D-624 |
≥40 |
耐磨測試(750g/500r),mg |
HG/T 3831-2006 |
≤30 |
附著力(Mpa)鋼基材 |
HG/T 3831-2006 |
8 |
附著力(Mpa)混凝土基材 |
HG/T 3831-2006 |
3.3 |
抗沖擊性能(kg.m) |
GB/T23446-2009 |
1.0 |
密度(g/cm3) |
GB/T 6750-2007 |
1.1 |
3、產品耐腐蝕介質Product corrosion resistant media
耐酸性 10%H2SO4或10%HCl,30d |
無腐蝕,不起泡,不脫落 |
耐堿性30%NaOH, 30d |
無腐蝕,不起泡,不脫落 |
耐鹽性30g/L,30d |
無腐蝕,不起泡,不脫落 |
耐鹽霧,2000h |
無腐蝕,不起泡,不脫落 |
耐油性 |
不起泡,不脫落 |
0號柴油,原油,30d |
無腐蝕,不起泡,不脫落 |
(僅供參考:需要注意揮發,濺蝕,溢出等影響,如需詳細數據,推薦用戶自己進行浸泡測試) |
五、施工注意事項Construction precautions
? 產品使用之前,請認真閱讀產品使用說明書;
? 施工環境溫度0℃-45℃,相對空氣濕度 ≤90%,基層露點溫度 ≥3℃為宜;
? 各種基層涂刮前,應進行相應的處理(咨詢SSM技術人員),并施工相對應的底涂;
? 本產品可在零下10℃的低溫情況下使用。如在低溫環境使用時,建議先將涂料桶放置在有空調的房間中保持24小時以上;
? 本產品在出廠時已經按需要調整了涂料粘度,施工人員不能私自繼續添加稀釋劑;
? 一遍涂刮厚度控制在800-1200微米為宜;
? 覆涂間隔:4-24h,如覆涂時間超過24小時或表面有積灰,建議用砂紙打磨并清潔后或涂抹界面劑后再施工;
? 建議涂裝方法: 刮板刮涂
? 施工現場注意通風、防火;
? 產品保質期自生產日起并確保未開封的狀態下6個月。
?產品包裝及保質期
包裝:10公斤/桶
產品保質期:6個月(自生產日起并未開原包裝情況下)
儲存環境溫度:5℃-32℃
在陰涼、通風的環境下儲存,避免陽光直射,遠離熱源。
? Before using the product, please read the product manual carefully;
? Construction ambient temperature 0℃-45℃, relative air humidity ≤90%, base dew point temperature ≥3℃ is appropriate;
? Before various base coating and scraping, the corresponding treatment should be carried out (consult SSM technicians), and the corresponding base coating should be constructed;
? This product can be used at a low temperature of minus 10℃. If used in a low temperature environment, it is recommended to place the paint bucket in an air-conditioned room for more than 24 hours;
? The viscosity of the coating has been adjusted according to the need when the product leaves the factory, and the construction personnel cannot continue to add diluent without permission;
? The thickness of a brushing is controlled at 800-1200 microns;
? Coating interval: 4-24h, if the coating time is more than 24 hours or the surface has dust, it is recommended to sand and clean or apply the interface agent before construction;
? Recommended coating method: scraper scraper
? Pay attention to ventilation and fire prevention at the construction site;
? Product packaging and shelf life
Packing: 10kg/barrel
? Product shelf life: 6 months (from the date of production without opening the original packaging)
Storage ambient temperature: 5℃-32℃
Store in a cool, ventilated environment away from direct sunlight and away from heat sources.
六、誠信聲明
圣士曼公司承諾以上所列各項產品數據是在相關實驗室相對應標準測試獲取,測試過程中相關數據會因測試環境和方法不同而結果略有差異。因此圣士曼公司建議客戶使用該產品前做好實地考察論證。除產品質量本身外,圣士曼公司不承擔任何責任并保證對以上數據進行調整和更新而不提前告知的權利,并請諒解。
The company promises that the above listed product data is obtained in the relevant laboratory corresponding to the standard test, and the relevant data will be slightly different due to the different test environment and method. Therefore, the company advises customers to conduct a field study before using the product. In addition to the quality of the product itself, the company does not assume any responsibility and guarantees the right to adjust and update the above data without prior notice.