SSM24 新一代彈性防水涂層
SSM24 New generation of elastic waterproof coating
一、產品介紹Product introduction
SSM24 新一代彈性防水涂層是德國Drache Handels UG 公司于二十一世紀研發的一種以單組份環保型水性高分子聚合物樹脂為主要原料，通過科學工藝生產精制而成，涂料涂層致密、與各類基材附著力強，封閉性能和抗?jié)B性能優良，遮蓋力好，具有優異的耐老化性能，戶外長期使用不脫落、不粉化、不變色，對建筑物表面具有優異防水保護作用，在歐美地區應用廣泛。
SSM24 New generation of elastic waterproof coating is a German Drache Handels UG company in the 21st century research and development of a single-component environmental protection water-based polymer resin as the main raw material, through scientific process production refined, dense coating, strong adhesion to various substrates, sealing performance and impermeability, good covering power. It has excellent aging resistance, outdoor long-term use does not fall off, does not powder, does not change color, has excellent waterproof protection on the surface of the building, and is widely used in Europe and the United States.
二、產品特性Product characteristics
? 涂膜密實，粘結性好，一體成型防水體系
? 優異的耐老化性能，戶外長期使用不脫落、不粉化、不變色，超長使用壽命。
? 優良的低溫柔性，-40°不開裂。
? 良好的耐酸、耐堿、防腐性能。
? 優異的防水、防霉性能。
? 環保水性涂料，對環境無污染，無毒性成分，使用安全。
? 施工方便，是焦油型聚氨酯防水涂料的更新?lián)Q代產品。
? The film is dense, good adhesion, one body forming waterproof system
? Excellent aging resistance, outdoor long-term use does not fall off, does not powder, does not change color, long service life.
? Excellent low temperature flexibility, -40° no cracking.
? Good acid resistance, alkali resistance, corrosion resistance.
? Excellent water and mildew resistance.
? Environmental protection waterborne paint, no pollution to the environment, non-toxic ingredients, safe to use.
? Easy to construct, it is the replacement product of tar-type polyurethane waterproof coating.
三、產品應用范圍Product application range
混凝土屋面、鋼結構屋面、廚房衛生間地面、浴室、蓄水池、地下室、防水卷材SBS及舊屋面的防水和翻新等工程（如瀝青、PVC、SBS、聚氨酯等各種基面）。
Concrete roof, steel structure roof, kitchen toilet floor, bathroom, reservoir, basement, waterproof coil SBS and old roof waterproof and renovation projects (such as asphalt, PVC, SBS, polyurethane and other bases).
四、技術參數Technical parameter
產品物理屬性Physical property of product
|
項目 |
結果 |
|
外觀 |
白色或灰色 |
|
光澤 |
啞光 |
|
比重（g/cm3 ） |
1.12 |
|
粘度(cps )@20℃ |
420 |
|
固含量（%） |
71%±2% |
|
表干時間（小時） |
夏天：1-2小時 冬天：2-4小時 |
|
理論涂布率 |
0.17kg/m2(厚度100um) |
典型物理測試性能Typical physical test performance
|
項目 |
測試標準 |
結果 |
|
遮蓋力（白色或淺色a）/(g/m2) |
JG/T235-2008 |
≤150 |
|
干燥時間/h |
JG/T172-2005 |
表干≤2； 實干≤24 |
|
附著力（劃格法）/級 |
JG/T172-2005 |
≤1 |
|
不透水性 |
JG/T172-2005 |
0.3MPa/30min不透水 |
|
耐沖擊性/cm |
JG/T172-2005 |
≥30 |
|
拉伸強度 |
JG/T172-2005 |
≥1.7Mpa |
|
斷裂伸長率 |
JG/T172-2005 |
≥200%（加胎體后視胎體延伸率） |
|
抗撕裂，≥kN/m |
JG/T172-2005 |
35 |
|
涂層耐溫變性（5次循環） |
JG/T172-2005 |
無異常 |
耐腐蝕性能Corrosion resistance
|
耐酸性c（5%H2SO4） |
JG/T172-2005 |
168 h無異常 |
|
耐鹽霧 |
JG/T172-2005 |
1000 h不起泡、不脫落 |
|
人工加速老化處理（1000h） |
拉伸強度保持率，% |
85 |
|
斷裂延伸率，% |
≥150 |
產品相應固化時間Product curing time
|
基材溫度 |
表干 |
步行強度 |
完全固化 |
|
+10℃ |
3h |
16h |
7d |
|
+20℃ |
1h |
10h |
7d |
|
+30℃ |
0.5h |
6h |
7d |
注意：固化時間會因環境情況的變化而有所不同，尤其是溫度和相對濕度的變化。
Note: Curing times vary depending on environmental conditions, especially temperature and relative humidity.
五、施工注意事項Construction precautions
? 施工應用指導
推薦干膜厚度：200-300um
覆涂間隔（25℃ ）：最小：4小時；最大：28小時
建議涂裝方法：刷涂，滾涂
? Construction application guidance
Recommended dry film thickness: 200-300um
Coating interval (25℃) : min. : 4 hours; Max: 28 hours
Recommended coating method: brush coating, roll coating
?施工環境
環境溫度：5-35℃
相對濕度：RH%：≤85%
? Construction environment
Ambient temperature: 5-35℃
Relative humidity: RH% : ≤85%
?施工基層處理
金屬表面：建議噴砂除銹，達到ISO8501-1或GB8923標準的Sa2.5級。
混凝土表面：達到堅固、密實、平整、干凈、干燥狀態。不應有起砂、起殼、裂縫、蜂窩麻面等現象。通常需要用膩?zhàn)有扪a(bǔ)。
? Construction base treatment
Metal surface: It is recommended to sand blast to remove rust, to ISO8501-1 or GB8923 standard Sa2.5.
Concrete surface: solid, dense, flat, clean, dry state. There should be no sand, shell, cracks, honeycomb and other phenomena. It usually needs to be repaired with putty.
?施工注意事項
被涂刷表面要求平整，處理干凈，無油、無銹、無灰塵
使用剩余的產品不可倒回原漆桶
本產品為水性涂料，請勿加入有機溶劑或其他涂料使用
? Construction precautions
The surface to be brushed should be smooth, clean and free of oil, rust and dust
Do not pour the remaining products back into the original paint bucket
This product is a water-based coating, do not add organic solvents or other coatings
?產品包裝及保質期
包裝：10公斤/桶
儲存環境溫度：5-35℃，產品保質期：12個月（未開封）
確保產品包裝密封完好，在陰涼，通風的環境下儲存，避免陽光的直射。
? Product packaging and shelf life
Packing: 10 kg/barrel
Storage ambient temperature: 5-35℃, product shelf life: 12 months (unopened)
Ensure product packaging is sealed and stored in a cool, ventilated environment, away from direct sunlight.
六、誠信聲明Statement of integrity
圣士曼公司承諾以上所列各項產品數據是在相關實驗室相對應標準測試獲取，測試過程中相關數據會因測試環境和方法不同而結果略有差異。因此圣士曼公司建議客戶使用該產品前做好實地考察論證。除產品質量本身外，圣士曼公司不承擔任何責任并保證對以上數據進行調整和更新而不提前告知的權利，并請諒解。
The company promises that the above listed product data is obtained in the relevant laboratory corresponding to the standard test, and the relevant data will be slightly different due to the different test environment and method. Therefore, the company advises customers to conduct a field study before using the product. In addition to the quality of the product itself, the company does not assume any responsibility and guarantees the right to adjust and update the above data without prior notice.