SSM04 單組份脂肪族防腐防水防護涂層

SSM04 single component aliphatic anti-corrosion and waterproof protective coating

 

一、產品介紹Product introduction

SSM04單組份脂肪族防腐防水防護涂層是德國Drache Handels UG 公司于二十一

世紀研發的一種單組份脂肪族聚脲防水防腐防護涂層材料，本產品與多種基材都具有優異的附著力。由于脂肪族預聚體獨特的化學結構，該產品不但具有卓越的高彈性、高強度、耐磨、抗撞擊性能，而且耐腐蝕、耐候性能優異，長期戶外使用不粉化、不變色，裝飾效果好。

SSM04 single component aliphatic anti-corrosion and waterproof protective coating is made by Drache Handels UGfrom Germany in 21 Century research and development of a single component aliphatic polyurea waterproof anticorrosive protective coating material, this product and a variety of substrates have excellent adhesion. Due to the unique chemical structure of aliphatic prepolymer, the product not only has excellent high elasticity, high strength, wear resistance, impact resistance, but also excellent corrosion resistance, weather resistance, long-term outdoor use without powder, no discoloration, good decorative effect.

 

二、產品特性Product characteristics

? 高固體含量，低VOC排放

?施工方法簡便，可刷涂、滾涂、空氣噴涂或高壓無氣噴涂。

?良好的耐磨、抗撞擊等物理性能

?優異的防水性能

?優異的耐化學介質腐蝕性能，可耐一定濃度的酸、堿、鹽、油、有機溶劑等

?卓越的耐老化性能，戶外使用不粉化、不變色

?優異的附著力，可快速牢固的粘結在鋼鐵、混凝土、木、玻璃纖維等基材的表面

?使用溫度范圍寬，可在-50℃~80℃的環境下使用

?單組份的特性使操作便捷，無需配比，降低了勞動力成本

? High solid content, low VOC emissions

? The construction method is simple, brush coating, roll coating, air spraying or high pressure airless spraying.

? Good wear resistance, impact resistance and other physical properties

? Excellent waterproof performance

? Excellent corrosion resistance to chemical media, can withstand a certain concentration of acid, alkali, salt, oil, organic solvents, etc

? Excellent aging resistance, outdoor use does not powder, does not change color

? Excellent adhesion, can be quickly and firmly bonded on the surface of steel, concrete, wood, glass fiber and other substrates

? Wide temperature range, can be used in -50℃~80℃ environment

? Single component characteristics make the operation convenient, no need to match, reduce labor costs

 

三、產品應用范圍Product application range

石油、化工、交通、建筑、電力、集裝箱等行業的戶外防水防水防腐防護。如橋梁維護，建筑屋面防水，水利大壩，水電站建筑防水等。

Outdoor waterproof, waterproof and anti-corrosion protection for petroleum, chemical, transportation, construction, power, container and other industries. Such as bridge maintenance, building roof waterproof, water conservancy dam, hydropower station building waterproof and so on.

 

四、技術參數Technical parameter

 

1.產品物理屬性Physical property of product

項目	結果
.外觀	顏色可調
比重（g/cm3 ）	1.2
粘度(cps )@20℃	500
固含量（%）	75（因不同顏色而略有差異）
表干時間（小時）@25℃	3-5
可操作（小時）	1
理論涂布率	0.16kg/m2(厚度100um)

 

2.典型物理測試性能Typical physical test performance

項目	測試標準	結果
硬度(邵氏A)	ASTM D-2240	82
伸長率（%）	ASTM D-412	350
拉伸強度（Mpa）	ASTM D-412	28
撕裂強度(kN/m)	ASTM D-624	63
耐磨測試(750g/500r),mg	HG/T 3831-2006	8
附著力（Mpa）鋼基材	HG/T 3831-2006	10
附著力（Mpa）混凝土基材	HG/T 3831-2006	3.5
抗沖擊性能（kg.m）	GB/T23446-2009	1.0
密度（g/cm3）	GB/T 6750-2007	1.2
耐人工老化性（1000h）	GB/T1865-2009	無起泡、開裂、生銹、剝落；粉化0級，變色2級，失光2級

 

3.耐腐蝕性能Corrosion resistance

耐酸性10%H2SO4或10%HCl,30d	無腐蝕，不起泡，不脫落
耐堿性10%NaOH, 30d	無腐蝕，不起泡，不脫落
耐鹽性10g/L,30d	無腐蝕，不起泡，不脫落
耐鹽霧，2000h	無腐蝕，不起泡，不脫落
耐油性0號柴油，原油，30d	無腐蝕，不起泡，不脫落
（僅供參考：需要注意揮發，濺蝕，溢出等影響，如需詳細數據，推薦用戶自己進行浸泡測試）

 

4.產品施工環境Product construction environment 

環境溫度	0~+35℃
相對濕度	35-85%
露點	≥3℃

 

5. 產品相應固化時間Product curing time

基材溫度	表干	步行強度	完全固化
+10℃	6h	30h	7d
+20℃	4h	24h	6d
+30℃	3h	20h	5d

注意：固化時間會因環境情況的變化而有所不同，尤其是溫度和相對濕度的變化。

Note: Curing times vary depending on environmental conditions, especially temperature and relative humidity.

 

五、施工注意事項Construction precautions

? 產品使用之前，請認真閱讀產品使用說明書；

?施工設備及應用指導

推薦干膜厚度：100-200um（或按設計要求）

覆涂間隔：6-30h，如覆涂時間超過30小時或表面有積灰，建議用砂紙打磨并清潔后再施工

建議涂裝方法:無氣噴涂，空氣噴涂，刷涂，滾涂

? 施工基層處理

金屬表面：建議噴砂除銹，達到ISO8501-1或GB8923標準的Sa2.5級。

混凝土表面：達到堅固、密實、平整、干凈、干燥狀態。不應有起砂、起殼、裂縫、蜂窩麻面等現象。通常需要用膩子修補。

木材表面：干凈，干燥，沒有毛刺，碎片和松散的碎片。

其它材質基層的應用處理可咨詢圣士曼技術人員。

? 施工注意事項

本產品可在零下10℃的低溫情況下使用。如在低溫環境使用時，建議先將涂料桶放置在有空調的房間中保持24小時以上。

圣士曼建議每次使用前先將涂料上下攪拌均勻，使用多少、倒出多少，并迅速將桶蓋蓋緊。使用后的涂料不得再倒回原桶中。

本產品在出廠時已經按需要調整了涂料粘度，施工人員不能私自繼續添加稀釋劑，如因環境、溫度原因粘度發生變化需要調整的，因電話詢問供應方，在獲得指導認可后方可添加專用稀釋劑。

?產品包裝及保質期

包裝：10公斤/桶

產品保質期：12個月（自生產日起并未開原包裝情況下）

儲存環境溫度：5℃-32℃

在陰涼、通風的環境下儲存，避免陽光直射，遠離熱源。

? Before using the product, please read the product manual carefully;

? Construction equipment and application guidance

Recommended dry film thickness: 100-200um (or according to design requirements)

Coating interval: 6-30h, if the coating time exceeds 30 hours or the surface has dust, it is recommended to sand and clean before construction

Recommended coating methods: airless spraying, air spraying, brush coating, roll coating

? Construction base treatment

Metal surface: It is recommended to sand blast to remove rust, to ISO8501-1 or GB8923 standard Sa2.5.

Concrete surface: solid, dense, flat, clean, dry state. There should be no sand, shell, cracks, honeycomb and other phenomena. It usually needs to be repaired with putty.

Wood surface: clean, dry, free of burrs, chips and loose debris.

The application of other material bases can be consulted by the Saint Seaman technicians.

? Construction precautions

This product can be used at a low temperature of minus 10℃. If used in a low temperature environment, it is recommended to place the paint bucket in an air-conditioned room for more than 24 hours.

Mr. Sainthmann recommends mixing the paint up and down before each use, how much to use and how much to pour out, and quickly closing the lid. After use, the paint must not be poured back into the original bucket.

This product has been adjusted according to the needs of the coating viscosity at the factory, the construction personnel can not continue to add diluent without permission, such as due to the environment, temperature changes in viscosity need to be adjusted, because of the phone to ask the supplier, after obtaining guidance approval can add special diluent.

? Product packaging and shelf life

Packing: 10kg/barrel

Product shelf life: 12 months (from the date of production without opening the original packaging)

Storage ambient temperature: 5℃-32℃ 

Store in a cool, ventilated environment away from direct sunlight and away from heat sources.

 

六、誠信聲明

圣士曼公司承諾以上所列各項產品數據是在相關實驗室相對應標準測試獲取，測試過程中相關數據會因測試環境和方法不同而結果略有差異。因此圣士曼公司建議客戶使用該產品前做好實地考察論證。除產品質量本身外，圣士曼公司不承擔任何責任并保證對以上數據進行調整和更新而不提前告知的權利，并請諒解。

The company promises that the above listed product data is obtained in the relevant laboratory corresponding to the standard test, and the relevant data will be slightly different due to the different test environment and method. Therefore, the company advises customers to conduct a field study before using the product. In addition to the quality of the product itself, the company does not assume any responsibility and guarantees the right to adjust and update the above data without prior notice.