SSM06 脂肪族天冬聚脲防腐防護涂層

SSM06 aliphatic aspartate polyurea corrosion protection coating

一、 產品介紹product introduction

SSM06 脂肪族天冬聚脲防腐防護涂層是德國Drache Handels UG 公司于二十一

世紀研發的一種選用聚天門冬氨酸酯與多聚異氰酸酯反應聚合而成，因聚天門冬氨酸酯是脂肪族位阻型仲胺，而選用的固化成分為脂肪族多聚異氰酸酯，形成的涂膜具有高保光、保色特性，適合在戶外長期使用。當仲胺基團與異氰酸酯基團發生反應時，形成了高交聯密度、交叉互穿的高分子鏈網狀結構，也使得本產品具有良好的物理化學特性。

SSM06 aliphatic asparton anticorrosive protective coating is made by Drache Handels UGfrom Germany in 21 Century research and development of a selection of polyaspartic acid ester and polyisocyanate reaction polymerization, because polyaspartic acid ester is aliphatic steric resistance type secondary amine, and the curing component is aliphatic polyisocyanate, the formed film has high light preservation, color preservation characteristics, suitable for long-term use in the outdoors. When the secondary amine group reacts with the isocyanate group, a high crosslinking density and cross-interpenetrating polymer chain network structure is formed, which also makes the product have good physical and chemical properties.

 

二、產品特性Product characteristics

? 高固低粘，流平性好，涂層堅韌致密、豐滿光亮、色彩鮮艷

? 對基層的附著力強，與聚氨酯、環氧等材料有良好配套性

? 硬度高、耐劃痕性、耐污性好

? 優異的耐磨、抗沖擊性能性、

? 良好的耐腐蝕性能，如酸，堿，鹽等

? 不變色、不泛黃、不粉化、耐老化，具有卓越的耐候和保光保色性

? 可直接應用于金屬表面（DTM）的面涂

? 本產品不含苯類溶劑和鉛類元素，對環境友好。

? High solid and low viscosity, good leveling, tough and dense coating, full and bright, bright color

? Strong adhesion to the base, good compatibility with polyurethane, epoxy and other materials

? High hardness, scratch resistance, good stain resistance

? Excellent wear resistance, impact resistance,

? Good corrosion resistance, such as acid, alkali, salt, etc

? No discoloration, no yellowing, no powder, aging resistance, with excellent weather resistance and light and color preservation

? Can be directly applied to metal surface (DTM) coating

? This product does not contain benzene solvents and lead elements, and is environmentally friendly.

 

三、產品應用范圍Product application range

鋼結構、儲罐、集裝箱、閥門、天然氣管道、車架、車軸、貨架、槽車、游泳池、污水池、化工圍堰等領域的防腐和防護。

Steel structure, storage tanks, containers, valves, natural gas pipelines, frames, axles, shelves, tank cars, swimming pools, sewage ponds, chemical cofferdams and other fields of anti-corrosion and protection.

 

四、技術參數Technical parameter

 

1.產品物理性能Product physical properties

項目	A組分	B組分
外觀	淺黃色液體	顏色可調
比重(g/cm3)	1.04	1.50
粘度（cps）@25℃	40-60	100-200
固含量（%）	75	90
混合比例（重量比）	1	2
表干時間h	1
適用期h    （25℃）	1
理論涂布率（表干膜厚）	0.15kg/㎡ 膜厚100μm

 

2.典型物理測試性能Typical physical test performance  

項目	測試標準	結果
鉛筆硬度		H
附著力（Mpa）金屬基材	HG/T 3831-2006	9.3
附著力（Mpa）混凝土基材	HG/T 3831-2006	2.8
抗?jié)B性		2.1Mpa
彎曲試驗（圓柱軸）		≤1mm
耐磨性（750g/500r）mg	HG/T 3831-2006	5
沖擊強度  kg·cm	GB/T 1732	50
耐候性人工加速老化2000h	GB/T14522-1993	失光性＜1，粉化＜1

 

3.耐腐蝕性能Corrosion resistance

耐酸性40%H2SO4或10%HCI,240h	無腐蝕，不起泡，不脫落
耐堿性40%NaOH,240h	無腐蝕，不起泡，不脫落
耐鹽性60g/L, 240h	無腐蝕，不起泡，不脫落
耐鹽霧3000h	無腐蝕，不起泡，不脫落
耐油性機油240h	無腐蝕，不起泡，不脫落
耐水性 48h	無起泡、起皺，不變色，不脫落
（注：以上耐化學介質性能是依據GB/T9274-1988測試法獲得，僅供參考。根據揮發，濃度，溢出的不同測試結果也許會略有差異，因此必要情況下，客戶獨自測試某項指標是有必要的。）

 

4.產品施工環境 Product construction environment

環境溫度	0~+35℃
濕度	≤85%
露點	≥3℃

 

5.產品相應固化時間Product curing time

基材溫度	表干	步行強度	完全固化
+10℃	2h	12h	7d
+20℃	1.5h	6h	7d
+30℃	1h	4h	7d

注意：固化時間會因環境情況的變化而有所不同，尤其是溫度和相對濕度的變化。

Note: Curing times vary depending on environmental conditions, especially temperature and relative humidity.

 

五、施工注意事項construction precautions

? 產品使用之前，請認真閱讀產品使用說明書；

? 手工涂刷、滾刷；空氣噴涂，空氣壓力0.3-0.5Mpa；無氣噴涂，噴涂壓力15-20Mpa

?推薦干膜厚度：150-300μm，覆涂間隔：最小1h  最大24h

? 施工基層處理：

金屬表面：建議噴砂除銹，達到ISO8501-1或GB8923標準的Sa2.5級。

混凝土表面：達到堅固、密實、平整、干凈、干燥狀態。不應有起砂、起殼、裂縫、蜂窩麻面等現象。通常需要用膩?zhàn)有扪a(bǔ)。

木材表面：干凈，干燥，沒有毛刺，碎片和松散的碎片。

其它材質基層的應用處理可咨詢圣士曼技術人員

? 施工注意事項：

使用之前，先將B組份充分?jǐn)嚢杈鶆颉?

按要求配比調好，用多少配多少，攪拌均勻后使用，調配好的涂料在1小時內用完。

配漆后，包裝桶內的原料必須蓋嚴，防止吸潮。

施工過程中保持干燥清潔，嚴禁與水、醇、酸、堿等接觸。

?產品包裝及保質期

包裝：10公斤/桶

儲存環境溫度：5℃—35℃。產品保質期自生產日起并確保未開封的狀態下

A組分：10個月      B組分：10個月

確保產品包裝密封完好，在陰涼，通風的環境下儲存，避免陽光的直射。

 

? Before using the product, please read the product manual carefully;

? Manual brushing, rolling brush; Air spraying, air pressure 0.3-0.5Mpa; Airless spraying, spraying pressure 15-20Mpa

? Recommended dry film thickness: 150-300μm, coating interval: minimum 1h maximum 24h

? Construction base treatment:

Metal surface: It is recommended to sand blast to remove rust, to ISO8501-1 or GB8923 standard Sa2.5.

Concrete surface: solid, dense, flat, clean, dry state. There should be no sand, shell, cracks, honeycomb and other phenomena. It usually needs to be repaired with putty.

Wood surface: clean, dry, free of burrs, chips and loose debris.

The application of other material bases can be consulted by the Saint Seaman technicians

? Construction precautions:

Before using, mix component B thoroughly.

Adjust according to the required ratio, how much to use, stir evenly after use, the prepared paint is used up within 1 hour.

After painting, the raw materials in the packing bucket must be tightly covered to prevent moisture absorption.

Keep it dry and clean during construction, and do not contact with water, alcohol, acid, alkali, etc.

? Product packaging and shelf life

Packing: 10kg/barrel

Storage ambient temperature: 5℃ -35℃. Product shelf life from the date of manufacture and ensure unopened state

Component A: 10 months  Component B: 10 months

Ensure product packaging is sealed and stored in a cool, ventilated environment, away from direct sunlight.

 

六、誠信聲明

圣士曼公司承諾以上所列各項產品數據是在相關實驗室相對應標準測試獲取，測試過程中相關數據會因測試環境和方法不同而結果略有差異。因此圣士曼公司建議客戶使用該產品前做好實地考察論證。除產品質量本身外，圣士曼公司不承擔任何責任并保證對以上數據進行調整和更新而不提前告知的權利，并請諒解。

The company promises that the above listed product data is obtained in the relevant laboratory corresponding to the standard test, and the relevant data will be slightly different due to the different test environment and method. Therefore, the company advises customers to conduct a field study before using the product. In addition to the quality of the product itself, the company does not assume any responsibility and guarantees the right to adjust and update the above data without prior notice.