SSM09單組份金屬節能防腐涂料

SSM09 single component metal energy-saving anticorrosive coating

一、產品介紹Product introduction

SSM09單組份金屬防腐涂層是德國Drache Handels UG 公司于二十一世紀研發的一種選用高性能防腐樹脂為成膜基料輔以亮澤型片狀金屬材料而組成，其成膜樹脂中含有大量醚鍵、脲鍵、縮二脲鍵、氨酯鍵和氫鍵，使成膜后涂層致密、堅韌，具有優異的機械物理性能和防腐蝕性能；經過預處理后的金屬片狀材料成膜時能均勻、有序的排布，由于其長徑比突出，防腐蝕能力強，應用中大大加長了腐蝕介質滲透破壞的距離，使得涂層可以在較薄的狀況下起到厚膜涂層才能達到的作用。選用的金屬材料為亮澤型片狀物，可有效反射掉光與熱輻射，達到降溫、節能的效果，可使生產、辦公環境更舒適，儲存的物料性能更穩定。涂層中的金屬片狀物自下而上的搭接，使涂層具有導電作用，可以防止靜電集聚，符合安全生產環境要求。

SSM09 single-component metal anti-corrosion coating is a kind of high-performance anti-corrosion resin developed by Drache Handels UG companyfrom Germany in the 21st century. It is composed of high performance anti-corrosion resin as film forming base material and bright sheet metal material. The film forming resin contains a large number of ether bonds, urea bonds, biuret bonds, ammonia ester bonds and hydrogen bonds, which makes the film coating dense and tough. Excellent mechanical and physical properties and anti-corrosion properties; After pretreatment, the metal sheet material can be uniformly and orderly arranged when forming a film. Due to its prominent length-diameter ratio and strong anti-corrosion ability, the application greatly lengthens the penetration and damage distance of the corrosive medium, so that the coating can play the role of the thick film coating in the thin condition. The selected metal material is a glossy flake, which can effectively reflect light and heat radiation, achieve cooling and energy saving effects, make the production and office environment more comfortable, and store the material performance more stable. The bottom-up lap of the metal sheet in the coating makes the coating conductive, which can prevent electrostatic accumulation and meet the requirements of safe production environment.

 

二、產品特性Product characteristics

? 優秀的防腐蝕性能，較薄的涂層也能發揮厚膜涂料的作用；

? 優異的附著力，低表面處理要求，可直接施涂于金屬工件的表面，即有底涂的效果，又有面涂的作用，真正做到底面一體化；

?涂層致密堅韌，可抵御循環應力破壞；

? 優異的機械性能，耐磨、抗撞擊、耐刻劃；

? 優異的防腐性能，可耐多種化學腐蝕介質侵蝕破壞，如鹽霧、酸雨等；

? 優良的耐老化性能，戶外使用無裂紋、不粉化；

?涂層在陽光下使用可反射光與熱，達到降溫、節能效果；

?具有導靜電能力，防止靜電集聚；

? 手涂型涂料，施工便利，可用多種施工操作方式；

? 單組份只需攪拌均勻便可涂裝，不似多組份涂料因配比不準而易影響質量。

 

? Excellent corrosion resistance, thin coating can also play the role of thick film coating;

? Excellent adhesion, low surface treatment requirements, can be directly applied to the surface of the metal workpiece, that is, the effect of undercoating, but also the effect of surface coating, really achieve the bottom surface integration;

? The coating is dense and tough, and can resist cyclic stress damage;

? Excellent mechanical properties, wear resistance, impact resistance, scratch resistance;

? Excellent anti-corrosion properties, can withstand a variety of chemical corrosive media erosion damage, such as salt spray, acid rain, etc.

? Excellent aging resistance, no crack, no powder for outdoor use;

? The coating can reflect light and heat in the sun to achieve cooling and energy saving effect;

? With the ability to conduct static electricity, prevent static accumulation;

? Hand coating, convenient construction, can be used in a variety of construction operations;

? A single component can be coated only by mixing evenly, unlike multi-component coatings, which are easy to affect the quality due to inaccurate ratio.

 

三、產品應用范圍Product application range

該產品廣泛應用于石油、化工、交通、建筑、電力等工業企業的防腐防護，特別是儲

罐、化工設備、鋼結構、預埋件（含導電型）、生產車間及倉儲室的屋面、墻面等。

The product is widely used in petroleum, chemical, transportation, construction, electric power and other industrial enterprises anti-corrosion protection, especially storage Tanks, chemical equipment, steel structure, embedded parts (including conductive type), roof and wall of production workshop and storage room, etc.

 

四、技術參數Technical parameter

 

產品物理屬性Physical property of product

項目	結果
外觀	金屬銀色
粘度(cps )@20℃	250
固含量（%）	≥68
表干時間（小時）	4
活化期（小時）	2
理論涂布率	0.125kg/m2(厚度60um)

 

典型物理測試性能 Typical physical test performance 

項目	測試標準	結果
鉛筆硬度	GB/T 6739-2006	H
彎曲試驗（圓柱軸）mm	GB/T 6742-1986	2
表面電阻，Ω	GB/T22374-2008	108
耐沖擊性(kg·cm)	GB/T 1732-1993	50
耐溫變性（200℃，8小時）	GB/T1735-2009	無異常
附著力（MPa）鋼基材	GB/T5210-2006	8
密度g/cm3	GB/T 6750-2007	1.1

 

耐腐蝕性能Corrosion resistance

耐酸性35% H2SO4或15%HCl,240h	不起泡、不生銹、不開裂、不剝落
耐堿性35%NaOH, 240h	不起泡、不生銹、不開裂、不剝落
耐鹽水性60g/L,240h	不起泡、不生銹、不開裂、不剝落
耐鹽霧，3000h	不起泡、不生銹、不開裂、不剝落
耐人工老化，2000h	不起泡、不生銹、不開裂、不剝落
耐濕性，1000h	不起泡、不生銹、不開裂、不剝落
耐油性0號柴油，原油，30d	不起泡、不生銹、不開裂、不剝落
（僅供參考：需要注意揮發、濺蝕、溢出等影響，如需詳細數據，推薦用戶自己進行浸泡測試）

 

產品相應固化時間Product curing time

基材溫度	表干	步行強度	完全固化
+10℃	6h	24h	7d
+20℃	4h	12h	6d
+30℃	2h	8h	5d

注：以上固化時間會因環境情況的變化而有所不同，尤其是溫度和相對濕度的變化。

Note: The above curing time will vary depending on environmental conditions, especially changes in temperature and relative humidity.

 

五、施工注意事項Construction precautions

? 產品使用之前，請認真閱讀產品使用說明書；

?推薦干膜厚度：120-240um（或按設計要求），表面處理：建議噴砂除銹，達到ISO8501-1或GB8923標準的Sa2.5級，覆涂間隔：2-24h，如覆涂時間超過24小時或表面有積灰，建議用砂紙打磨并清潔后再施工建議涂裝方法:無氣噴涂，空氣噴涂，刷涂，滾涂；

?施工環境溫度-5℃- +35℃，相對空氣濕度 45%-85%，基層露點溫度≥3℃為宜；

?施工基層處理

金屬表面：建議噴砂除銹，達到ISO8501-1或GB8923標準的Sa2.5級。

混凝土表面：達到堅固、密實、平整、干凈、干燥狀態。不應有起砂、起殼、裂縫、蜂窩麻面等現象。通常需要用膩子修補。

木材表面：干凈，干燥，沒有毛刺，碎片和松散的碎片。

其它材質基層的應用處理可咨詢圣士曼技術人員。

?本產品可在零下10℃的低溫情況下使用。如在低溫環境使用時，建議先將涂料桶放置在有空調的房間中保持24小時以上；

?圣士曼建議每次使用前先將涂料上下攪拌均勻，使用多少、倒出多少，并迅速將桶蓋蓋緊。使用后的涂料不得再倒回原桶中。倒出來的涂料須在1小時內用完；

?本產品在出廠時已經按需要調整了涂料粘度，施工人員不能私自繼續添加稀釋劑，如因環境、溫度原因粘度發生變化需要調整的，應電話詢問供應方，在獲得指導認可后方可添加指定專用稀釋劑；

? 施工人員必須佩戴防護口罩、防護鏡等防護工作服；

? 施工過程中，做好通風和防火；

?產品包裝及保質期

包裝：10公斤/桶

儲存環境溫度：5℃—35℃。產品保質期自生產日起并確保未開封的狀態下

? 產品保質期自生產日起并確保未開封的狀態下10個月。

 

? Before using the product, please read the product manual carefully;

? Recommended dry film thickness: 120-240um (or according to design requirements), surface treatment: recommended sandblasting rust, up to ISO8501-1 or GB8923 standard Sa2.5, coating interval: 2-24h, if the coating time is more than 24 hours or the surface has dust, it is recommended to sand and clean before construction. Suggested painting methods: airless spraying, air spraying, brush coating, roll coating;

? Construction ambient temperature -5℃ -+ 35℃, relative air humidity 45%-85%, base dew point temperature ≥3℃ is appropriate;

? Construction base treatment

Metal surface: It is recommended to sand blast to remove rust, to ISO8501-1 or GB8923 standard Sa2.5.

Concrete surface: solid, dense, flat, clean, dry state. There should be no sand, shell, cracks, honeycomb and other phenomena. It usually needs to be repaired with putty.

Wood surface: clean, dry, free of burrs, chips and loose debris.

The application of other material bases can be consulted by the Saint Seaman technicians.

? This product can be used at a low temperature of minus 10℃. If used in a low temperature environment, it is recommended to place the paint bucket in an air-conditioned room for more than 24 hours;

? St. Schmann recommends mixing the paint up and down before each use, how much to use, how much to pour out, and quickly close the lid. After use, the paint must not be poured back into the original bucket. The poured paint must be used up within 1 hour;

? This product at the factory has been adjusted according to the need to adjust the viscosity of the paint, the construction personnel can not continue to add diluent privately, such as due to the environment, temperature changes in viscosity need to be adjusted, should call the supplier, after obtaining guidance approval can add designated special diluent;

? Construction personnel must wear protective work clothes such as protective masks and goggles;

? Ventilation and fire prevention during construction;

? Product packaging and shelf life

Packing: 10 kg/barrel

Storage ambient temperature: 5℃ -35℃. Product shelf life from the date of manufacture and ensure unopened state

? Product shelf life from the production date and ensure unopened state of 10 months.

 

六、誠信聲明Statement of good faith

圣士曼公司承諾以上所列各項產品數據是在相關實驗室相對應標準測試獲取，測試過程中相關數據會因測試環境和方法不同而結果略有差異。因此圣士曼公司建議客戶使用該產品前做好實地考察論證。除產品質量本身外，圣士曼公司不承擔任何責任并保證對以上數據進行調整和更新而不提前告知的權利，并請諒解。

The company promises that the above listed product data is obtained in the relevant laboratory corresponding to the standard test, and the relevant data will be slightly different due to the different test environment and method. Therefore, the company advises customers to conduct a field study before using the product. In addition to the quality of the product itself, the company does not assume any responsibility and guarantees the right to adjust and update the above data without prior notice.