SSM10高分子改性重防腐涂料

SSM10 polymer modified heavy anticorrosive coating

 

一、產品介紹Product introduction

SSM10高分子改性重防腐涂料是德國Drache Handels UG 公司于二十一世紀研發的一種以單組份聚氨酯樹脂預聚加工合成，成膜涂層致密柔韌，富有彈性。能適應工業企業的各種金屬結構在使用過程中受震動、熱脹冷縮的輕微變形而不產生裂痕，有效阻止空氣、水份、各種腐蝕介質滲入，延緩金屬結構發生腐蝕。涂層中存在大量脲鍵、縮二脲鍵、氨酯鍵和氫鍵，因此具有優異的機械物理性能和防腐蝕性能。

SSM10 polymer modified heavy anticorrosive coating is developed by Drache Handels UG company in the 21st century, which is synthesized by prepolymerization of single-component polyurethane resin. The film coating is dense and flexible. It can adapt to the slight deformation of various metal structures in industrial enterprises during the use of vibration, thermal expansion and cold contraction without cracking, effectively preventing air, water, and various corrosive media from infiltrating, and delaying the corrosion of metal structures. There are a lot of urea bonds, biuret bonds, ammonia ester bonds and hydrogen bonds in the coating, so it has excellent mechanical and physical properties and anti-corrosion properties.

 

二、產品特性Product characteristics

? 優異的附著力，與碳鋼、混凝土等基材結合牢固

?涂層致密柔韌，可抵御循環應力破壞

?高固體含量，符合環保使用需求

?優異的機械性能，耐磨、抗撞擊、耐刻劃

?優異的防水性能

?優異的防腐性能，可耐多種化學腐蝕介質侵蝕破壞，如鹽霧、酸雨等

?優良的耐老化性能，戶外使用無裂紋、不粉化

?手涂型涂料，施工便利，可用多種施工操作方式

?單組份只需攪拌均勻便可涂裝，不似多組份涂料因配比不準而易影響質量

 

? Excellent adhesion, firmly combined with carbon steel, concrete and other substrates

? The coating is compact and flexible, and can resist cyclic stress damage

? High solid content, in line with the needs of environmental protection

? Excellent mechanical properties, wear resistance, impact resistance, scratch resistance

? Excellent waterproof performance

? Excellent anti-corrosion properties, can resist a variety of chemical corrosive media erosion damage, such as salt spray, acid rain, etc

? Excellent aging resistance, no crack, no powder for outdoor use

? Hand coating, convenient construction, can be used in a variety of construction operations

? A single component can be coated only by mixing evenly, unlike multi-component coatings, which are easy to affect the quality due to inaccurate ratio

 

三、產品應用范圍Product application range

該產品廣泛應用于石油、化工、交通、建筑、電力等工業企業的防腐防水防護等。

The product is widely used in petroleum, chemical, transportation, construction, electric power and other industrial enterprises anti-corrosion and waterproof protection.

 

四、技術參數Technical parameter

 

產品物理屬性Physical property of product

項目	結果
外觀	顏色可調
粘度(cps )@20℃	250
固含量（%）	≥65
表干時間（小時）	2-4
活化期（小時）	1
理論涂布率	0.13kg/m2(厚度100um)

 

典型物理測試性能  Typical physical test performance

項目	測試標準	結果
鉛筆硬度	GB/T 6739-2006	2H
彎曲試驗（圓柱軸）mm	GB/T 6742-1986	1
抗擊穿強度(kv/mm)	HG/T 3330-1980	250
耐沖擊性(kg·cm)	GB/T 1732	60
耐溫變性（-40--200℃）24小時	GB/9278-1988	無異常
附著力（Mpa）鋼基材	ASTM D-3359	5A(最高級)
密度g/cm3	GB/T 6750-2007	1.03

 

耐腐蝕性能Corrosion resistance

耐酸性50% H2SO4或15%HCl,30d	無腐蝕，不起泡，不脫落
耐堿性50%NaOH, 30d	無腐蝕，不起泡，不脫落
耐鹽性50g/L,30d	無腐蝕，不起泡，不脫落
耐鹽霧，2000h	無腐蝕，不起泡，不脫落
耐油性0號柴油，原油，30d	不起泡，不脫落
（僅供參考：需要注意揮發、濺蝕、溢出等影響，如需詳細數據，推薦用戶自己進行浸泡測試）

 

產品相應固化時間Product curing time

基材溫度	表干	步行強度	完全固化
+10℃	6h	24h	7d
+20℃	3h	12h	6d
+30℃	2h	8h	5d

注：以上固化時間會因環境情況的變化而有所不同，尤其是溫度和相對濕度的變化。

Note: The above curing time will vary depending on environmental conditions, especially changes in temperature and relative humidity.

五、施工注意事項Construction precautions

? 推薦干膜厚度：100-200um（或按設計要求）

?表面處理：建議噴砂處理達到Sa2.5級以上，或電動工具打磨達到St3級

?覆涂間隔：2-24h，如覆涂時間超過24小時或表面有積灰，建議用砂紙打磨并清潔后再施工

?建議涂裝方法:無氣噴涂，空氣噴涂，刷涂，滾涂

?環境溫度:-5 -+35℃，相對濕度：35-85%，露點：金屬材質表面施工時必須大于露點溫度3℃以上。

?金屬表面：建議噴砂除銹，達到ISO8501-1或GB8923標準的Sa2.5級。

?混凝土表面：達到堅固、密實、平整、干凈、干燥狀態。不應有起砂、起殼、裂縫、蜂窩麻面等現象。通常需要用膩子修補。

?木材表面：干凈，干燥，沒有毛刺，碎片和松散的碎片。

?其它材質基層的應用處理可咨詢圣士曼技術人員。

?本產品可在零下10℃的低溫情況下使用。如在低溫環境使用時，建議先將涂料桶放置在有空調的房間中保持24小時以上。

? 圣士曼建議每次使用前先將涂料上下攪拌均勻，使用多少、倒出多少，并迅速將桶蓋蓋緊。使用后的涂料不得再倒回原桶中。倒出來的涂料須在1小時內用完。

?本產品在出廠時已經按需要調整了涂料粘度，施工人員不能私自繼續添加稀釋劑，如因環境、溫度原因粘度發生變化需要調整的，應電話詢問供應方，在獲得指導認可后方可添加指定專用稀釋劑。

?產品保質期：12個月（未開封），儲存環境溫度：5℃-35℃，請在陰涼、通風的環境下儲存，避免陽光直射，遠離熱源。

?產品包裝：10公斤/桶

 

? Recommended dry film thickness: 100-200um (or according to design requirements)

? Surface treatment: It is recommended that sandblasting treatment reach Sa2.5 or above, or power tool grinding reach St3

? Coating interval: 2-24h, if the coating time is more than 24 hours or the surface has dust, it is recommended to sand and clean before construction

? Recommended coating method: airless spraying, air spraying, brush coating, roll coating

Ambient temperature :-5 -+35℃, relative humidity: 35-85%, dew point: metal surface construction must be greater than the dew point temperature of 3℃ or more.

? Metal surface: It is recommended to sand blast to remove rust, to ISO8501-1 or GB8923 standard Sa2.5.

? Concrete surface: solid, dense, flat, clean, dry state. There should be no sand, shell, cracks, honeycomb and other phenomena. It usually needs to be repaired with putty.

? Wood surface: clean, dry, free of burrs, chips and loose debris.

? The application of other material base can consult the technicians of St.

? This product can be used at a low temperature of minus 10℃. If used in a low temperature environment, it is recommended to place the paint bucket in an air-conditioned room for more than 24 hours.

? St. Schmann recommends mixing the paint up and down before each use, how much to use, how much to pour out, and quickly close the lid. After use, the paint must not be poured back into the original bucket. The poured paint must be used up within one hour.

? This product at the factory has been adjusted according to the need to adjust the viscosity of the paint, the construction personnel can not continue to add diluent privately, such as due to the environment, temperature changes in viscosity need to be adjusted, should call the supplier, after obtaining guidance approval can add the designated special diluent.

? Shelf life: 12 months (unopened), storage environment temperature: 5℃-35℃, please store in a cool and ventilated environment, avoid direct sunlight, away from heat sources.

? Product packaging: 10 kg/barrel

 

六、誠信聲明Statement of good faith

圣士曼公司承諾以上所列各項產品數據是在相關實驗室相對應標準測試獲取，測試過程中相關數據會因測試環境和方法不同而結果略有差異。因此圣士曼公司建議客戶使用該產品前做好實地考察論證。除產品質量本身外，圣士曼公司不承擔任何責任并保證對以上數據進行調整和更新而不提前告知的權利，并請諒解。

The company promises that the above listed product data is obtained in the relevant laboratory corresponding to the standard test, and the relevant data will be slightly different due to the different test environment and method. Therefore, the company advises customers to conduct a field study before using the product. In addition to the quality of the product itself, the company does not assume any responsibility and guarantees the right to adjust and update the above data without prior notice.