SSM20混凝土聚脲專用封孔膩?zhàn)?
SSM20 concrete polyurea special sealing putty
一、產品介紹Product information
SSM20混凝土聚脲專用封孔膩?zhàn)邮堑聡?guó)Drache Handels UG 公司于二十一世紀研發的
一種聚脲改性膩?zhàn)?，該膩?zhàn)訌?qiáng)度高、韌性好，可操作時間長，施工性能良好，具有較
好的封孔性能和極優異的層間附著力。
SSM20 concrete polyurea special sealing putty is Drache Handels UG companyfrom Germany in the 21st century research and development The utility model relates to polyurea modified putty, which has high strength, good toughness, long operating time, good construction performance, and superior performancegood sealing properties and excellent interlayer adhesion.
二、產品特性Product characteristics
? 涂層無接縫、堅韌致密；
? 粘結力強，耐水耐堿，與基層結合牢固；
? 優異的抗沖擊、抗碰撞、耐磨性能；
? 優異的耐腐蝕性和耐化學介質性能，如耐各種酸、堿、鹽等介質腐蝕；
? 封孔效果好，可施工時間長；
? 找平效率高，立面不易流掛，提高施工工效；
? 高涂布率節約使用成本。
? The coating is seamless, tough and dense;
? Strong adhesion, water and alkali resistance, firmly combined with the base;
? Excellent impact resistance, collision resistance, wear resistance;
? Excellent corrosion resistance and chemical resistance, such as resistance to various acids, alkali, salt and other media corrosion;
? Good sealing effect, long construction time;
? High leveling efficiency, the facade is not easy to hang, improve the construction efficiency;
? High coating rate saves the use cost.
三、產品應用范圍Product application range
該產品在歐美廣泛應用于金屬基層、混凝土、水泥砂漿抹面的找平、填縫、封孔處理，
尤其對環境惡劣或粘結強度要求較高的水池和屋頂面的平整處理效果更佳。
The product is widely used in Europe and the United States in metal base, concrete, cement mortar plastering leveling, joint filling, sealing treatment,
Especially for the harsh environment or high bond strength requirements of the pool and roof surface leveling effect is better.
四、技術參數Technical parameter
（1）材料理化性能Physical and chemical properties of materials
|
項目 |
結果 |
|
外觀 |
平整無泡 |
|
固含量（%） |
≥90（原液，不包括添加石英砂） |
|
適用期h （25℃） |
1 |
|
表干時間（h） |
≤3 |
|
混合比例 |
A:B=1:1,液體：石英砂（粉）=1:1-2 |
|
實干時間（h） |
≤12 |
|
理論涂布率 |
0.7kg/m2(厚度1000 um) |
（2）材料物理性能Physical properties of materials
|
項目 |
結果 |
|
附著力 |
混凝土基材：≥3.0Mpa(基材破壞) 鋼板基材：≥8Mpa |
|
耐沖擊性(kg·cm) |
50 |
（3）材料耐腐蝕性能Corrosion resistance of the material
|
耐鹽水性，360h |
無腐蝕，不起泡，不脫落 |
|
耐酸性（10％H2SO4，168h） |
無腐蝕，不起泡，不脫落 |
|
耐溫變性（-40—+160℃） |
無變化 |
|
（注：以上耐化學介質性能是依據GB/T9274-1988測試法獲得，僅供參考。根據揮發，濃度，溢出的不同測試結果也許會略有差異，因此必要情況下，客戶獨自測試某項指標是有必要的。 |
|
五、施工注意事項Construction precautions
? 產品使用之前，請認真閱讀產品使用說明書；
? 施工環境溫度0℃-45℃，相對空氣濕度 ≤85%，基層露點溫度≥3℃為宜；
? 每次使用前先將涂料B組份上下攪拌均勻，使用多少、倒出多少，然后與A組份等比例混合后，再次攪拌均勻，并迅速將桶蓋蓋緊，倒出來的涂料須在60分鐘內用完。使用剩余的產品不可倒回原包裝桶；
? 請勿加入有機溶劑或其他涂料一起使用；
? 混凝土表面：應確?；鶎颖砻娼Y(jié)實完好、干凈，清除基層表面的油污、霉菌、灰塵及其他松散物，使之堅固干燥；
? 用批嵌工具進行刮涂施工；
? 嚴格按照比例配制，將A,B組份充分?jǐn)嚢杈鶆蚝?，再添加石英砂或石英粉，再一次充分?jǐn)嚢杈鶆蚝筮M(jìn)行使用；
?產品保質期：12個月（未開封），儲存環境溫度：5℃-35℃，請?jiān)陉帥?、通風的環境下儲存，避免陽光直射，遠離熱源。
?產品包裝：10公斤/桶
? Before using the product, please read the product manual carefully;
? Construction ambient temperature 0℃-45℃, relative air humidity ≤85%, base dew point temperature ≥3℃ is appropriate;
? Before each use, the paint B component is stirred up and down, how much is used, how much is poured out, and then mixed with A component in equal proportion, stirring again, and quickly cover the bucket tightly, the poured paint must be used up within 60 minutes. The remaining products can not be poured back into the original packaging bucket;
? Do not use with organic solvents or other coatings;
? Concrete surface: Ensure that the base surface is solid and clean, remove oil, mold, dust and other loose matter on the base surface, and make it strong and dry;
? Scrape and paint with batch tools;
? Preparation in strict accordance with the proportion, the A and B components are fully stirred, and then quartz sand or quartz powder is added, and then fully stirred again for use;
? Shelf life: 12 months (unopened), storage environment temperature: 5℃-35℃, please store in a cool and ventilated environment, avoid direct sunlight, away from heat sources.
? Product packaging: 10 kg/barrel
六、誠信聲明Statement of good faith
圣士曼公司承諾以上所列各項產品數據是在相關實驗室相對應標準測試獲取，測試過程中相關數據會因測試環境和方法不同而結果略有差異。因此圣士曼公司建議客戶使用該產品前做好實地考察論證。除產品質量本身外，圣士曼公司不承擔任何責任并保證對以上數據進行調整和更新而不提前告知的權利，并請諒解。
The company promises that the above listed product data is obtained in the relevant laboratory corresponding to the standard test, and the relevant data will be slightly different due to the different test environment and method. Therefore, the company advises customers to conduct a field study before using the product. In addition to the quality of the product itself, the company does not assume any responsibility and guarantees the right to adjust and update the above data without prior notice.